SXS Network UK
Can-Am Maverick 64" X3 Upper and Middle Radius Rods
Can-Am Maverick 64" X3 Upper and Middle Radius Rods
Couldn't load pickup availability
If you already have CT Race Worx High Clearance Billet Lower Radius Rods and you want to upgrade your upper and middle rods to match, this is the kit for you! Our middle (toe) link and upper radius rod are solid 1-1/8" 7075-T6 aluminum. What sets apart from the norm in the industry are the joints that we use, we use the absolute highest quality joint on the market. The JMX series of joints from FK is something that we've had a tremendous amount of sucess with over the years. These joints use a fabric based teflon liner known as a PTFE liner. The inner joint housing is compressed to create a preload on the ball that will stay tight roughly 3 times longer than a standard injected teflon rod end, which is standard in the industry. We do offer boots for these joints at an addition price of $8 per joint, this increases the life of the joint even more by keeping the debris out of the joint. Don't be fooled by cheap imitations using inferior joints and inferior materials. You may pay less at up front but over the course of a year after those cheap joints wear out you're going to have more time and money invested than doing it right the first time. The spacers in each joint are 303 stainless steel so strength and corrosion won't be an issue.
This kit allows for full adjustability of camber and toe while installed sitting at ride height.
Our business and products are based around using American products and material, we don't source cheaper parts or materials from overseas.
Replacement wearable items can be found at the bottom of this page.
Share
![Can-Am Maverick 64" X3 Upper and Middle Radius Rods](http://sxsnetworkparts.co.uk/cdn/shop/files/Can-AmMaverick64X3UpperandMiddleRadiusRods.jpg?v=1693564670&width=1445)