Maverick X3 Front A Arm Bushing Pins and Bushings, Full Set

Does your X3 have play in the front suspension or are you switching a arms? Here's the chance to eliminate the play and keep that front end tight with our a arm bushings. Machined in house and made from a special blend of thermoplastics, these bushings have incredible wear resistance and are self lubricating that will out last the factory bushings by thousands of miles. While these bushings are self lubricating we did groove the inside of the bushings to allow for grease and to push out any dirt or debris from being in wet or muddy conditions.

Our bushing pins are made from 17-4 and then heat treated for the ultimate combination for strength and wear resistance. We use a true 12mm bore for a much tighter suspension hardware fit for less suspension play and movement.

Sold in sets of 16, enough to do the front suspension completely. Made to work with the stock bushing pins.

These bushings are machined to a tight tolerance and fit stock and our a arms snug. Aftermarket a arms not using build components produced with a tight tolerance may have undesirable fitment.

Damage can occur from switching the bushing from one set of arms to another. If bushing need to be warrantied, markings on the bushings from excessive force while removing the bushing will deny any warranty claim.

Worn bushings must be sent back to us for warranty claim once order has been confirmed, return shipping will not be covered as part of the warranty.