SXS Network UK
Polaris Pro R/Turbo R Lower Spindle Pin - Pair
Polaris Pro R/Turbo R Lower Spindle Pin - Pair
Couldn't load pickup availability
Our spindle pins are made from a 17-4 Stainless Steel and heat treated to H900 specs. These are used in our Pro R/Turbo R Lower A Arms but will work with other aftermarket arms using joints/uniballs and spindle pins, specifically the FK WSSX14T uniball and JMX14T-770 rod end. When changing from a factory balljoint to a uniball or rod end with a spindle pin its easy to get the pivot location in the wrong location. Through our scan work and reverse engineering of the stock balljoint we were able to retain the EXACT pivot point as stock. Pins that do not retain the same pivot point can throw off geometry and can create unwanted changes through the suspension travel arc. We changed the thread of the pin where it attaches to the spindle as well, we went from a M12 course thread to a larger 1/2-20 fine thread for increased strength. A 5/16" Grade 9 12pt bolt retains the upper cap to the spindle pin and should be installed with red loctite and torqued to 25ft lbs.
These parts do NOT have a lifetime warranty. Priced per pair and will come as seen in the picture.
Share
![Polaris Pro R/Turbo R Lower Spindle Pin - Pair](http://sxsnetworkparts.co.uk/cdn/shop/files/PolarisProRTurboRLowerSpindlePin-Pair.jpg?v=1693596645&width=1445)